3 Phase 1000ppr 57mm NEMA23 1N.M ~3N.m Closed Loop Stepper Motor and Driver Kit

Description

-----
3 Phase 1000ppr 57mm NEMA23 1N.M ~3N.m Closed Loop Stepper Motor and Driver Kit
Packaging:
A
3 phase
NEMA23
Closed-loop stepper motor 1pcs
LC57H355/LC57H380/LC57H3100
B
3 phase closed loop stepper motor driver 1pcs
LCDA357H
C
1pcs
3M Encoder cable
. If you need longer cables, please contact with us first.
Electrical Specifications for nema23 motor :
Motor model
Step/angle
Length
Holidng torque
Current
Rotor inertia
Encoder line
Lead wire
Weight
°
mm
N.M
A
g.cm2
PPR
NO.
Kg
LC57H355
1.2
55+22
1
3.5
300
1000
3
1.0
LC57H380
1.2
80+22
2
3.5
500
1000
3
1.4
LC57H3100
1.2
100+22
3
4
700
1000
3
1.8
Notes:
The above is only for representative products, We can according to customer requirements to remake.
Matched Driver for LCDA357H
Features:
1. Voltage input range: 18V ~ 50VDC
2. Maximum peak current: 7A
3. Subdivision range: 200 ~ 51200ppr
4. Signal input: differential / single-ended, pulse / direction
5. Impulse response limit frequency: 200KHZ
6. Power-on parameter auto-tuning function
7. Closed-loop vector control to ensure that the motor high-speed high-torque output.
and make ensuring that the motor does not lose step
8. With over-voltage, over-current, tracking error tolerance and other protection
Main parameters:
1. Electrical Specifications
Parameter
LCDA357H
Minimum value
Typical value
Maximum value
unit
Max peak current
-
-
7
A
Input power voltage
20
36
50
Vdc
Logic input current
7
10
16
mA
Pulse frequency
-
-
200
kHz
2.Interface definition
1) Motor & power input port
Symbol
Name
Explanation
U-
Motor U phase winding
V
Motor V phase winding
W
Motor W phase winding
Vdc
Input DC power supply positive
+20V~+50V
GND
Input
power ground
0V
2) Encoder signal input port:
Symbol
Name
EB+
Motor encoder B phase positive input
EB-
Motor encoder B phase negative input
EA+
Motor encoder A positive input
EA
－
Motor encoder A phase negative input
VCC
Encoder power supply
EGND
Encoder power ground
3) Control signal port:
Name
Explanation
PUL
＋
Pulse input signal: pulse effective edge adjustable, the default pulse rising edge is valid; in order to reliably respond to the pulse signal, the pulse width should be greater than 1.2μs. Such as the use of +12 V or +24 V when the need to string 3K resistance
PUL
－
DIR
＋
Direction input signal: high / low level signal, in order to ensure reliable reversing of the motor, the direction of the signal should be preceded by pulse signal at least 5μs to establish, such as the use of +12 V or +24 V string 3K resistor.
DIR
－
ENA
＋
Enable control signal: This input signal is used to enable or disable. When ENA +, ENA- have input, the drive will cut off the motor phase to make the motor in a free state. When this function is not required, the terminal can be left floating.
Such as the use of +12 V or +24 V when the need to string 3K resistance
ENA
－
Pend+
Positioning completion signal positive side
Pend-
Positioning completion signal negative
ALM
＋
Alarm output positive terminal
ALM
－
Alarm output negative terminal
Products pictures :
Lichuan Driver LCDA357H Panel Instruction :
Shipping
1. For Europe customers,generanlly send by
standard shipping,DHL,Fedex,TNT
.
2.
Russian
customers please tell us your full name;
Shipping cost is cheap,generanlly send by
CDEK and PONY
,less than 20 days delivery,no tax fee and customs chearance easily.
3.
Brazil,Argentina,Peru,India
customers please give us your
tax number
after payment.
Buying Notes
1.Product sources
All the stepper and servo series products sold in this store are LICHUAN brand, factory-direct sale, no branch.
2.Model selection
Before purchasing, please contact us to confirm the model number and specifications to avoid any misunderstanding.
3.Payment
Ebay, Paypal and T/T is accepted.
4.Delivery
Samples in stock will be delivered within 7 business days and customized samples will be delivered within 30 days.
Delivery date for bulk order depends on order quantity.