Leather Treadle Belt with Staple for Domestic / Industrial Sewing Machines

Description

Leather Treadle Belt For Use On Treadle & Industrial Sewing Machines
Belt purchased will measure between 68"-72" as most treadles require less than 68" and industrials even less from motor to belt groove in hand wheel. Includes heavy duty closing staple.  3/16" (5mm)
Lace machine with belt with some tension.  Overlap belt to determine amount of excess belt to be removed.  Mark match line with a marker and cut to length.  Using treadle pliers, punch hole in non-staple end.  Place belt back in place, hooking the staple in the newly made hole.  Using the treadle pliers, close the staple.  After a few hours of use the belt may need to be adjusted as the leather stretches.  If this occurs, open staple and repeat process.  Make sure not to over tighten as it may cause undue wear and tear on bearings.  Should only maintain minimal tension as required for proper functioning of the machine.
Belt manufacturer may vary although almost always AlphaSew AAA pre-packaged.
If purchasing multiple items please request a combined shipping invoice.
Items are sent via USPS Priority Mail with Tracking so you can get your machine up and running as fast as possible.